Speakers for your Kirby Morgan© products are now easier to replace. The P/N 515-090 Speaker requires no soldering. You no longer have to replace a complete Earphone Assembly. If your wires, terminals, covers and earphone protector are in good condition, you can use these with the new earphone speaker. The wires are secured to the speaker […]
Category: Electronics
Ocean Technology Systems ME-16R® Hot Mic® (150 Ohm)
The patented ME-16R Hot Mic® evolved from many years of research and development to design a true noise canceling microphone that can withstand the harsh marine environment. Many off-the-shelf elements have been used in diving helmets and full face masks (ffm), but require some sort of protection. The protection usually compromises the quality defeating its […]
3M 15 Ounce Scotchkote FD Electrical Coating
3M™ 15 Oz Scotchkote™ FD Electrical Coating – Creates Waterproof Seal On Taped Electrical Splices And Connections – Oil-Resistant . Flexible when dry. Electrical Coating seals wiring insulation to protect from corrosion. Brush-applied coating resists moisture, oil and acids. Helps prevent cable and connector corrosion due to battery outgassing. 15 fl. oz. Contact us today […]
Amron International 3129-01 Easy Temperature Monitor
The Amron International Model 3129 Easy Temperature Monitor is a panel mounted 3-1/2 inch digital temperature meter displaying temperature in Fahrenheit or Centigrade. The Model 3129 is used with a RTD Temperature Probe Model 3129-RTD. Unit is supplied ready for panel mounting and has a bezel and mounting bracket. The probe is supplied with a […]
3M™ Scotchcast™ 82-F1 Splice Kit, 0.25 in. – 0.8 in. Cable OD, 6-1/0 AWG Conductor Size
3M 82-F1 Inline Splice Kits are used for unshielded wet or dry portable power cables and cords with copper conductors. These molds are removable and reusable. The 3M 82-F1 and 82-F2 Inline Splice Kits are rated up to 5 kilovolts for single conductor and up to 1 kilovolts (600/2000 volts. mine portable cable) for multiple […]
3M™ Scotchcast™ 82-A1N Inline Splice Kit, 2 AWG Conductor Size
Description: Here is the information for the 82-A1N Kit: Conductor Size: #2 AWG Maximum Connector O.D.: 13/32″ Maximum Cable O.D. 5/8″ Maximum Sheath Opening (L): 4 1/2″ Maximum The 82-A series is UL Listed 486D, File Number E102356. Connector is not included, order separately. Each kit makes one splice. Use the 3M™ Scotchcast™ Inline Resin Splice […]
BIRNS Rubber Connectors
BIRNS Rubber Connectors are simple, low-cost cable connectors for light-to-medium power or signal applications, and/or for applications where weight and/or magnetic signature are considerations. They are rated to 1,000m and 500VDC, and made of a durable elastomer that cannot chip or dent. They mate with each other in the in-line mode, and with BIRNS Polymeric […]
Nuvair Pro CO Analyzer
Fast response Carbon Monoxide analyzer with Alarm housed in a compact water resistant container. Alarm goes off at 10ppm CO. Made to test breathing gases, easy to operate, reliable and accurate. Response time of 90% in less than 15 seconds Temperature compensated sensor User replaceable 3 x AAA batteries Low battery warning indicator Easy calibration […]
Nuvair Pro O2 Analyzer
Easy to operate, extremely accurate and stable, the Nuvair Pro O2 unit is preferred by commercial, military, technical, and advanced recreational divers using Nitrox. The Pro O2 analyzer can be placed in line with your compressor during gas production or as a standalone unit testing individual scuba tanks or storage cylinders. Fast Response, Thermally Compensated […]
Digital Multi-Frequency Imaging Sonar
Using Ethernet communications, this all-in-one, high performance digital imaging sonar can exceed 100 shots per second on the 1 m range at a 2 mm range resolution, producing near-photographic image quality. The 881L is a multi-frequency system that can operate with customized configurations or revert to default settings to match appropriate operating range scales. In […]