The Kirby Morgan® Air Control System 5 (KMACS 5) is a lightweight, portable control box for use in surface supplied air diving operations. The KMACS 5 controls the diver’s air supply and monitors the diver’s depth. The KMACS 5 is also available with communications (see link below). The air supply can be from either a […]
Category: Air Control
Kirby Morgan® Diver’s Manifold Block Assembly
The Manifold Block Assembly provides a control point for your bailout supply when using a light weight full face mask. It is equipped with four low pressure outlets, a check valve and an emergency valve assembly. It is available with a #6 JIC fitting, a 9/16″ O2 fitting or a standard SCUBA fitting. Part # […]
Amron International Model 8250 Low Pressure Air Control System for 2 Divers
The Amron International 8250 Two-Diver Low Pressure Air Control System is a central control point for the supply of breathing air for up to two commercial divers. The air control system was designed and built for quick setup and breakdown and its compact design maximizes its mobility. The 8250 is a cost effective product intended […]
Kirby Morgan® Air Control System 5 (KMACS 5) With Communications
Kirby Morgan Air Control System 5 (KMACS 5) is a lightweight, portable control box for use in surface supplied air diving operations. The KMACS 5 controls the diver’s air supply, communications and monitors the diver’s depth. It allows two divers clear push-to-talk (two wire) or round robin (four wire) communications. The KMACS 5 is also […]
Amron International 8211 Compact Two Diver Surface Command Unit (SCU)
Portable and Affordable The Amron International Model 8211 Compact Two Diver Surface Command Unit (SCU) is ergonomically designed with the customer in mind. The 8211 is a compact portable and affordable 2-diver Surface Command Unit that uses the high quality Amcom ™ II Diver Deluxe Communicator. This surface command unit is a self-contained high and […]
Divers Supply, Inc. Air Control Box, 2 Diver, 3HP Supply, 2 Pneumo, FSW
This 2 diver (Oxygen Umbilical Connections) air box is custom made and is IMCA compliant. Features: Three high pressure supplies w/ Tescom regulators installed in the manifold Two 0-225 FSW pneumo gauges with air supplied from either of the divers, One primary air supply for each diver Common back up air supply with isolator valves Three high […]
Divers Supply TDACBD
Two Diver Air Control Box Deluxe – Water-resistant case – Two diver pneumo panel with two 6″ 0-225 FSW, 1″ increment pneumo gauges – 0-300 psi inlet gauges – Two diver air manifold with check valves on primary and secondary air supplies – Over-pressurization regulator for pneumo gauge protection – Individual pressurization valves for each […]
Divers Supply TDACB
Two Diver Air Control Box – Water-resistant case – Two diver pneumo panel with two 6″ 0-225 FSW, 1′ increment pneumo gauges – 0-300 psi inlet gauges – Two diver air manifold with check valves on primary and secondary air supplies – Over-pressurization regulator for pneumo gauge protection – Individual pressurizing valves for each pneumo […]
Divers Supply SDPB
Single Diver Pneumo Box – Water-resistant case – 6″ 0-225 FSW 1′ increment pneumo gauge, shock mounted – Pressurizing valve – 10′ pneumo whip – Oxygen inlet and outlet connections Contact us today for information about new Commercial Diving Equipment, Used Commercial Diving Equipment and/or Kirby Morgan Helmets!
AMRON Amcommand II
The Amron Amcommand II is a portable, self contained, two diver complete dive system. The Amcommand II provides all of the operations necessary to monitor and control the diving operation. The system is a central control point for the supply of breathing air to the divers, monitors the divers depth, provides an audio alarm if […]