Kirby Morgan® P/N 525-678 Regulator Tool Kit W/Pouch for KM47 & KM77

Kirby Morgan® P/N 525-678 Regulator Tool Kit W/Pouch for KM47 & KM77

This is the tool kit for the REX Regulator. This regulator comes standard on all KM47 and KM77 helmets. Reseller Restriction This item is reseller restricted. Call us at 206-784-5050 or email info@divecommercial.com to purchase. Images of Kirby Morgan Helmets, Masks, or logos are registered trademarks or Kirby Morgan Dive Systems Inc. Used with permission. Contact us […]

Kirby Morgan® P/N 525-630 Balanced 455 Regulator Tool Kit

Kirby Morgan® P/N 525-630 Balanced 455 Regulator Tool Kit

This is the tool kit for the Balanced 455 Regulator. This regulator comes standard on all KM97 helmets and is available on all new KMDSI BandMasks and helmets (except the SL17b). Reseller Restriction This item is reseller restricted. Call us at 206-784-5050 or email info@divecommercial.com to purchase. Images of Kirby Morgan Helmets, Masks, or logos are registered […]

Kirby Morgan® P/N 525-620 Regulator Tool Kit with Pouch

Kirby Morgan® P/N 525-620 Regulator Tool Kit with Pouch

This is the tool kit for the Superflow and Superflow 350 Regulator. This regulator is found on SL17’s SL17K’s, SL27’s, KM37’s, KM37ss’s, KMB18’s and KMB28’s. Reseller Restriction This item is reseller restricted. Call us at 206-784-5050 or email info@divecommercial.com to purchase. Images of Kirby Morgan Helmets, Masks, or logos are registered trademarks or Kirby Morgan Dive […]

Stanley Tools Power Units – GTR Line

Stanley Tools Power Units – GTR Line

GTR20B02 / GTR20B06 GTR20B02 The GTR20 is a small compact hydraulic power unit designed to provide power for hydraulic tools requiring 5 gpm/20 lpm up to 10 gpm/40 lpm. The GTR20 is powered by a choice of Briggs & Stratton or Honda industrial grade engines. Folding and locking handle, electric start, computer throttle control, pressurized […]

Stanley Tools Power Units – GT Line

Stanley Tools Power Units – GT Line

GT18 / GT23 GT18 Hydraulic Power Units The GT18 hydraulic power unit is engineered for continuous professional use and is optimized to deliver ideal flows and pressures to both Type 1 and Type 2 hydraulic tools. Its powerful 18 HP Briggs & Stratton engine and best-in-class cooling system deliver the power and heat rejection pros […]

Stainless Steel, 8″ Shackle Breaker Assembly

Stainless Steel, 8″ Shackle Breaker Assembly

Dive Commercial International sells 8″, Stainless Steel Shackle Breakers with a Stainless Steel Shackle and a Brass #2 Snap Shackle. The three parts can be purchased separately. We carry a large variety of shackles, snap shackles and other related hardware. Contact us today for information about new Commercial Diving Equipment, Used Commercial Diving Equipment and/or Kirby Morgan Helmets!  

Insert Test Block for KMDSI Fiberglass Helmet & BandMask Insert Testing

Insert Test Block for KMDSI Fiberglass Helmet & BandMask Insert Testing

This Insert Test Block tool was carefully designed by Dive Lab. It is the owners responsibility to not use this tool without full knowledge and a complete understanding of the correct procedures set down by Dive Lab for testing inserts in KMDSI fiberglass helmets and BandMasks. Dive Commercial International is not responsible for any incorrect or misuse of this […]

Stanley Tools GR29 Hydraulic Underwater Grinder

Stanley Tools GR29 Hydraulic Underwater Grinder

The Stanley Hydraulics Underwater Grinder GR29 is used by commercial divers for top, face, and side grinding using 9 inch (228.6 mm) diameter wheels. Wire brushes can also be used and depressed-center wheels with an optional adapter. This hydraulic underwater tool can be used by commercial divers to clean off barnacles or coral off of […]