The BandMask® “Hard Shell”, P/N 520-026, provides an additional layer of protection. No drilling or modifications are required for mounting on your Bandmask®. The legs of the Head Harness (Spider) run through the Hard Shell, holding it in place over the hood. The thick engineering thermoplastic (ABS) material is very durable. Reseller Restriction This item is […]
Kirby Morgan® P/N 200-017 An overpressure relief valve on your bailout bottle’s first-stage regulator makes over pressurization of the bailout hose due to a high pressure creep nearly impossible. The valve is designed to release pressure in the event of over pressurization of the first stage regulator. Reseller Restriction This item is reseller restricted. Call us at […]
Kirby Morgan’s “Emergency Valve Assembly”, P/N 505-070 is available complete. The separate components are also available. Contact us for information. Reseller Restriction This item is reseller restricted. Call us at 206-784-5050 or email info@divecommercial.com to purchase. Images of Kirby Morgan Helmets, Masks, or logos are registered trademarks or Kirby Morgan Dive Systems Inc.® Used with […]
Replace the bent tube if it is excessively scratched, lacks its chrome plating, is dented or compressed deeper than 1/8 inch. If the helmet has been used for burning jobs, carefully check for erosion of the metal or severe corrosion. Replace if any erosion is present or integrity is in question. Keep in mind the […]
Kirby Morgan’s “Emergency Valve Assembly”, P/N 505-070 is available complete. The separate components are also available. Contact us for information. Reseller Restriction This item is reseller restricted. Call us at 206-784-5050 or email info@divecommercial.com to purchase. Images of Kirby Morgan Helmets, Masks, or logos are registered trademarks or Kirby Morgan Dive Systems Inc.® Used with […]
Replace the bent tube if it is excessively scratched, lacks its chrome plating, is dented or compressed deeper than 1/8 inch. If the helmet has been used for burning jobs, carefully check for erosion of the metal or severe corrosion. Replace if any erosion is present or integrity is in question. Keep in mind the […]
The Air Train Gasket, Part #510-762, is made from high quality rubber and eliminates the need to use silicone sealant to seal the edge of the air train on the inside of fiberglass helmet shells or mask frames. It also eliminates having to fill the hole (with silicone sealant) where the Alignment Screw is located […]
The Air Train Gasket, Part #510-762, is made from high quality rubber and eliminates the need to use silicone sealant to seal the edge of the air train on the inside of fiberglass helmet shells or mask frames. It also eliminates having to fill the hole (with silicone sealant) where the Alignment Screw is located so […]
Speakers for your Kirby Morgan© products are now easier to replace. The P/N 515-090 Speaker requires no soldering. You no longer have to replace a complete Earphone Assembly. If your wires, terminals, covers and earphone protector are in good condition, you can use these with the new earphone speaker. The wires are secured to the […]
Speakers for your Kirby Morgan© products are now easier to replace. The P/N 515-090 Speaker requires no soldering. You no longer have to replace a complete Earphone Assembly. If your wires, terminals, covers and earphone protector are in good condition, you can use these with the new earphone speaker. The wires are secured to the speaker […]