Replace the bent tube if it is excessively scratched, lacks its chrome plating, is dented or compressed deeper than 1/8 inch. If the helmet has been used for burning jobs, carefully check for erosion of the metal or severe corrosion. Replace if any erosion is present or integrity is in question.
Keep in mind the bent tube is a critical component that routes breathing gas to the regulator system.
New Bent Tube Assemblies can be ordered with or without a new O-Ring & Teflon® O-Ring.
Order P/N 555-155 for the Bent Tube with the O-Ring and Teflon® O-Ring
Order P/N 555-154 for the Bent Tube without the O-Ring and Teflon® O-Ring
Order P/N 510-012 for the O-Ring
Order P/N 520-033 for the O-Ring, Teflon®
This item is reseller restricted. Call us at 206-784-5050 or email email@example.com to purchase.
Images of Kirby Morgan Helmets, Masks, or logos are registered trademarks or Kirby Morgan Dive Systems Inc.® Used with permission.
Contact us today for information about new Commercial Diving Equipment, Used Commercial Diving Equipment and/or Kirby Morgan Helmets!