The SuperFlow® & SuperFlow® 350 have been the benchmark in surface supplied demand regulators for more than 40 years and remain the most widely used helmet and BandMask® regulators. The uncomplicated chrome plated all brass regulator is of a non- balanced and venturi assisted design that allows the diver a wide range of adjustment. This […]
The balanced piston ensures a minimum cracking pressure and a minimum pressure drop across the entire breathing cycle. It has four standard low pressure outlets plus one “straight through” high flow port designed to be used with an optional big bore low pressure hose. Two high pressure ports are standard as well. CE Certification (view […]
The uniquely shaped exhaust whisker diverts exhaust bubbles away from the diver’s field of vision. This scuba regulator’s overall breathing performance is outstanding and easily exceeds all European CE requirements when used with the Kirby Morgan® CE approved first stage regulator (P/N 305-161) or other CE approved first stage regulators (those with a minimum intermediate […]
Upgrade your KMDSI Helmet or BandMask by replacing your original regulator with Kirby Morgans 455 Balanced Regulator (standard equipment on the KM97 Helmet) . The 455 Balanced regulator is a downstream balanced poppet design, and is featured on the new KM 97 Helmet. Like the widely used SuperFlow® 350, the 455 Balanced has a multi […]
The SuperFlow® & SuperFlow® 350 have been the benchmark in surface supplied demand regulators for more than 40 years and remain the most widely used helmet and BandMask® regulators. The uncomplicated chrome plated all brass regulator is of a non- balanced and venturi assisted design that allows the diver a wide range of adjustment. This […]
The balanced piston ensures a minimum cracking pressure and a minimum pressure drop across the entire breathing cycle. It has four standard low pressure outlets plus one “straight through” high flow port designed to be used with an optional big bore low pressure hose. Two high pressure ports are standard as well. CE Certification (view […]
The uniquely shaped exhaust whisker diverts exhaust bubbles away from the diver’s field of vision. This scuba regulator’s overall breathing performance is outstanding and easily exceeds all European CE requirements when used with the Kirby Morgan® CE approved first stage regulator (P/N 305-161) or other CE approved first stage regulators (those with a minimum intermediate […]
These stainless steel Helmet Brackets are suitable for mounting either Cameras or Lights to Kirby Morgan® diving helmets and BandMasks. These brackets are mounted to the Port Retainer using the Plug Screw which does not screw into a Port Retainer Insert. Contact us today for information about new Commercial Diving Equipment, Used Commercial Diving Equipment and/or Kirby Morgan Helmets!
These stainless steel Helmet Brackets are suitable for mounting either Cameras or Lights to Kirby Morgan® diving helmets and BandMasks. These brackets are mounted to the Port Retainer using the Plug Screw which does not screw into a Port Retainer Insert. Contact us today for information about new Commercial Diving Equipment, Used Commercial Diving Equipment and/or Kirby Morgan Helmets!
Kirby Morgan® P/N 225-017 The overpressure relief valve (P/N 200-017) should be disassembled, cleaned, and inspected at least once a year, anytime the valve fails monthly lift testing, or fails to maintain a seal when within the specified range. Below (in blue) is a link to a KMDSI document showing what parts are included in […]