Below (in blue) is a link to a document showing what parts are included in Kirby Morgan’s Soft Goods Overhaul Kit, P/N 525-377 for the KM77 Helmets: P/N 525-377 Reseller Restriction This item is reseller restricted. Call us at 206-784-5050 or email info@divecommercial.com to purchase. Images of Kirby Morgan Helmets, Masks, or logos are registered trademarks […]
Below (in blue) is a link to a document showing what parts are included in Kirby Morgan’s Soft Goods Overhaul Kit, P/N 525-380 for the KM37ss Helmets: P/N 525-380 Reseller Restriction This item is reseller restricted. Call us at 206-784-5050 or email info@divecommercial.com to purchase. Images of Kirby Morgan Helmets, Masks, or logos are registered trademarks […]
Below (in blue) is a link to a document showing what parts are included in Kirby Morgan’s Soft Goods Overhaul Kit, P/N 525-363 for the KM37, SL17K & SL17C Helmets with Superflow® 350 Regulator: P/N525-363 Reseller Restriction This item is reseller restricted. Call us at 206-784-5050 or email info@divecommercial.com to purchase. Images of Kirby Morgan Helmets, […]
Below (in blue) is a link to a KMDSI document showing what parts are included in Kirby Morgan’s Soft Goods Overhaul Kit, P/N 525-364 for the KM97 Helmet: P/N 525-364 Reseller Restriction This item is reseller restricted. Call us at 206-784-5050 or email info@divecommercial.com to purchase. Images of Kirby Morgan Helmets, Masks, or logos are […]
The Quad Valve™ is designed to couple the regulator exhaust with the helmet main exhaust and route them into a single plenum chamber, mounted between the regulator body and main exhaust body. The exhaust gas then must pass through either one of two (or both) exhaust valves that are part of the bubble deflector (whisker). […]
If you use an inflation hose screwed into the bottom of the Side Block Assembly on your Kirby Morgan© helmet or BandMask, the P/N 555-210 Restrictor Adapter (and P/N 310-003 O-Ring) should be used. The main purpose of the Restrictor Adapter is to limit gas flow in the event the hose ruptures or is severed, […]
Dive Commercial International can supply you with brand new parts for your Miller 400 Helmet. Many parts are in stock, ready to ship. Click on the blue text below to see the list of parts with location numbers for the Miller 400 Helmet. Scroll down to see the exploded view: Miller 400 Exploded view Contact us today […]
Anode Kits are available for all KMDSI Helmets and Masks. Here are the Part Numbers and Descriptions for KMDSI Helmets and BandMasks: P/N 525-374 – Anode Kit, SL-27, KM-37, KM-47, KM-57 or SL-17K P/N 525-375 – Anode Kit, all KMDSI stainless steel helmets P/N 525-373 – Anode Kit, BandMasks (KMB18 & KMB28) P/N 525-376 – Anode […]
The Welding Lens Assembly (P/N 525-403) will fit all SuperLite® and Kirby Morgan® Helmets and BandMasks®. Each Port Retainer comes with two slotted plug screws which are designed to protect the two threaded holes for mounting the Welding Lens and Welding Shield Assembly. Below (in blue) is a link showing the parts that are included in the Welding Lens […]
The patented ME-16R Hot Mic® evolved from many years of research and development to design a true noise canceling microphone that can withstand the harsh marine environment. Many off-the-shelf elements have been used in diving helmets and full face masks (ffm), but require some sort of protection. The protection usually compromises the quality defeating its […]