Kirby Morgan® P/N 200-017 An overpressure relief valve on your bailout bottle’s first-stage regulator makes over pressurization of the bailout hose due to a high pressure creep nearly impossible. The valve is designed to release pressure in the event of over pressurization of the first stage regulator. Reseller Restriction This item is reseller restricted. Call us at […]
Kirby Morgan’s “Emergency Valve Assembly”, P/N 505-070 is available complete. The separate components are also available. Contact us for information. Reseller Restriction This item is reseller restricted. Call us at 206-784-5050 or email info@divecommercial.com to purchase. Images of Kirby Morgan Helmets, Masks, or logos are registered trademarks or Kirby Morgan Dive Systems Inc.® Used with […]
Replace the bent tube if it is excessively scratched, lacks its chrome plating, is dented or compressed deeper than 1/8 inch. If the helmet has been used for burning jobs, carefully check for erosion of the metal or severe corrosion. Replace if any erosion is present or integrity is in question. Keep in mind the […]
DCI can supply you with a new muffler for your compressor’s Yanmar L100V Diesel engine. Contact us for information. Contact us today for information about new Commercial Diving Equipment, Used Commercial Diving Equipment and/or Kirby Morgan Helmets!
The Air Train Gasket, Part #510-762, is made from high quality rubber and eliminates the need to use silicone sealant to seal the edge of the air train on the inside of fiberglass helmet shells or mask frames. It also eliminates having to fill the hole (with silicone sealant) where the Alignment Screw is located so […]
Speakers for your Kirby Morgan© products are now easier to replace. The P/N 515-090 Speaker requires no soldering. You no longer have to replace a complete Earphone Assembly. If your wires, terminals, covers and earphone protector are in good condition, you can use these with the new earphone speaker. The wires are secured to the speaker […]
Below (in blue) is a link to a KMDSI document showing the parts that are included in Kirby Morgan’s SL27 with the Superflow® Regulator, Soft Goods Overhaul Kit, P/N 525-365: P/N 525-365 Reseller Restriction This item is reseller restricted. Call us at 206-784-5050 or email info@divecommercial.com to purchase. Images of Kirby Morgan Helmets, Masks, or […]
Below (in blue) is a link to a KMDSI document showing what parts are included in Kirby Morgan’s Superflow® 350 Regulator Rebuild Kit, P/N 525-309 for the Superflow® 350 regulator: P/N 525-309 Reseller Restriction This item is reseller restricted. Call us at 206-745-4410 or email info@divecommercial.com to purchase. Images of Kirby Morgan Helmets, Masks, or […]
Upgrade your KMDSI Helmet or BandMask by replacing your original regulator with Kirby Morgans 455 Balanced Regulator (standard equipment on the KM97 Helmet) . The 455 Balanced regulator is a downstream balanced poppet design, and is featured on the new KM 97 Helmet. Like the widely used SuperFlow® 350, the 455 Balanced has a multi […]
These stainless steel Helmet Brackets are suitable for mounting either Cameras or Lights to Kirby Morgan® diving helmets and BandMasks. These brackets are mounted to the Port Retainer using the Plug Screw which does not screw into a Port Retainer Insert. Contact us today for information about new Commercial Diving Equipment, Used Commercial Diving Equipment and/or Kirby Morgan Helmets!