Below (in blue) is a link to a document showing what parts are included in Kirby Morgan’s Soft Goods Overhaul Kit, P/N 525-363 for the KM37, SL17K & SL17C Helmets with Superflow® 350 Regulator: P/N525-363 Reseller Restriction This item is reseller restricted. Call us at 206-784-5050 or email info@divecommercial.com to purchase. Images of Kirby Morgan Helmets, […]
Below (in blue) is a link to a KMDSI document showing what parts are included in Kirby Morgan’s Soft Goods Overhaul Kit, P/N 525-364 for the KM97 Helmet: P/N 525-364 Reseller Restriction This item is reseller restricted. Call us at 206-784-5050 or email info@divecommercial.com to purchase. Images of Kirby Morgan Helmets, Masks, or logos are […]
The patented Kirby Morgan SuperMask® is a lightweight modular full face mask that allows for easy and rapid adaptation to various self contained underwater breathing apparatuses as well as surface supplied systems. The mask frame and rigid components are made of high impact plastic. The face seal is made of the highest quality silicone and […]
The patented Kirby Morgan SuperMask® is a lightweight modular full face mask that allows for easy and rapid adaptation to various self contained underwater breathing apparatuses as well as surface supplied systems. The mask frame and rigid components are made of high impact plastic. The face seal is made of the highest quality silicone and […]
The Quad Valve™ is designed to couple the regulator exhaust with the helmet main exhaust and route them into a single plenum chamber, mounted between the regulator body and main exhaust body. The exhaust gas then must pass through either one of two (or both) exhaust valves that are part of the bubble deflector (whisker). […]
The Quad Valve™ is designed to couple the regulator exhaust with the helmet main exhaust and route them into a single plenum chamber, mounted between the regulator body and main exhaust body. The exhaust gas then must pass through either one of two (or both) exhaust valves that are part of the bubble deflector (whisker). […]
If you use an inflation hose screwed into the bottom of the Side Block Assembly on your Kirby Morgan© helmet or BandMask, the P/N 555-210 Restrictor Adapter (and P/N 310-003 O-Ring) should be used. The main purpose of the Restrictor Adapter is to limit gas flow in the event the hose ruptures or is severed, […]
If you use an inflation hose screwed into the bottom of the Side Block Assembly on your Kirby Morgan© helmet or BandMask, the P/N 555-210 Restrictor Adapter (and P/N 310-003 O-Ring) should be used. The main purpose of the Restrictor Adapter is to limit gas flow in the event the hose ruptures or is severed, […]
Anode Kits are available for all KMDSI Helmets and Masks. Here are the Part Numbers and Descriptions for KMDSI Helmets and BandMasks: P/N 525-374 – Anode Kit, SL-27, KM-37, KM-47, KM-57 or SL-17K P/N 525-375 – Anode Kit, all KMDSI stainless steel helmets P/N 525-373 – Anode Kit, BandMasks (KMB18 & KMB28) P/N 525-376 – […]
Anode Kits are available for all KMDSI Helmets and Masks. Here are the Part Numbers and Descriptions for KMDSI Helmets and BandMasks: P/N 525-374 – Anode Kit, SL-27, KM-37, KM-47, KM-57 or SL-17K P/N 525-375 – Anode Kit, all KMDSI stainless steel helmets P/N 525-373 – Anode Kit, BandMasks (KMB18 & KMB28) P/N 525-376 – Anode […]