Features: Submersible and Self Priming Dredges solids up to 4 inches in size Removes sand, clay and mud from work structures 800 gpm (3,028 lpm) discharge Easy volute inspection and clean out Can run dry without damage 4 in. discharge Steel volute, cast iron impeller & polyethylene wear plates CE Certified Specifications: Capacity: 4 in. […]
Features: Marine, mining, utility and construction applications Operate on 2000 PSI / 6 GPM (up to 13 GPM) hydraulic oil Cuts pipe up to 6 in. diameter, wood up to 8 in. diameter, and metal plates up to 3/4 in. diameter Specifications: Motor Output: 2 HP Oil Pressure: 2000 PSI Oil Volume (minimum) Flow: 6 […]
1000 Denier Ripstop Codura, Nylon with Polypro Webbing, Pockets with Velcro Closure, Brass Grommets, Black, One Size Fits All Contact us today for information about new Commercial Diving Equipment, Used Commercial Diving Equipment and/or Kirby Morgan Helmets!
If the foam in your standard Kirby Morgan® BandMask® Hood (P/N 510-712) is no longer suitable for use, replacement foam is available. Order P/N 510-505 “Face Seal, No Hood”. Click on: INSTRUCTIONS for a video showing the procedures and necessary items for removing your KMB Hood. Click on: INSTRUCTIONS for a video showing the procedures and necessary […]
Spare/replacement Neck Ring Assemblies are available for all KMDSI helmets with metal bottom Helmet Rings. Contact us for pricing. We’ll need to know the model number of the helmet you intend to use the new Neck Ring Assembly with. Neoprene Neck Dams in Size Medium are standard. Other sizes and Latex Neck Dams can be custom […]
This is the battery charger used with the Ocean Technology Systems (OTS) manufactured communicator in a Kirby Morgan KMAC5. The OTS communicator has “MK3-KMDSI” printed on the front panel of the communicator. Ask for KMDSI P/N: 415-150. This charger will not work with an Amron communicator. Contact us today for information about new Commercial Diving Equipment, Used Commercial Diving Equipment and/or Kirby Morgan Helmets!
The 455 Balanced regulator, sets a milestone in surface supplied breathing performance and is also compatible with all Kirby Morgan Helmets and BandMasks® that feature the SuperFlow® 350 or 450 regulators. The 455 Balanced regulator is a downstream balanced poppet design, and is featured on the new KM 97 Helmet. Like the widely used SuperFlow® […]
This is the battery charger used with the Amron manufactured communicator in a Kirby Morgan KMAC5. Ask for P/N 2823-603. This charger will not work with an Ocean Technology Systems (OTS) communicator. Contact us today for information about new Commercial Diving Equipment, Used Commercial Diving Equipment and/or Kirby Morgan Helmets!
This harness features 2″ webbing with adjustable shoulder straps, single point lifting D-ring, integrated adjustable crotch strap with quick release snaps and adjustable chest strap. Available in Small, Medium, Large and Extra Large. Contact us today for information about new Commercial Diving Equipment, Used Commercial Diving Equipment and/or Kirby Morgan Helmets!
The Broco® P/N HVR-4401 Oxygen Regulator is a two-stage unit delivering the constant flow and high volume required for underwater burning. Broco’s research demonstrates cutting efficiency depends more on oxygen flow than oxygen pressure. Broco’s high volume regulator is offered to meet this basic requirement. Designed and manufactured for ease of operation, maximum efficiency, and years […]