Kirby Morgan’s “Emergency Valve Assembly”, P/N 505-070 is available complete. The separate components are also available. Contact us for information. Reseller Restriction This item is reseller restricted. Call us at 206-784-5050 or email info@divecommercial.com to purchase. Images of Kirby Morgan Helmets, Masks, or logos are registered trademarks or Kirby Morgan Dive Systems Inc.® Used with […]
Replace the bent tube if it is excessively scratched, lacks its chrome plating, is dented or compressed deeper than 1/8 inch. If the helmet has been used for burning jobs, carefully check for erosion of the metal or severe corrosion. Replace if any erosion is present or integrity is in question. Keep in mind the […]
This tape has a heavy-duty polyethylene backing and is single coated with synthetic rubber adhesive. The permanently tacky adhesive bonds well over a wide temperature range. Excellent low-temperature bonding. Each roll measures 2 inches by 60 yards. Available in white and black Contact us today for information about new Commercial Diving Equipment, Used Commercial Diving Equipment and/or Kirby Morgan Helmets!
DCI can supply you with a new muffler for your compressor’s Yanmar L100V Diesel engine. Contact us for information. Contact us today for information about new Commercial Diving Equipment, Used Commercial Diving Equipment and/or Kirby Morgan Helmets!
The Air Train Gasket, Part #510-762, is made from high quality rubber and eliminates the need to use silicone sealant to seal the edge of the air train on the inside of fiberglass helmet shells or mask frames. It also eliminates having to fill the hole (with silicone sealant) where the Alignment Screw is located so […]
Speakers for your Kirby Morgan© products are now easier to replace. The P/N 515-090 Speaker requires no soldering. You no longer have to replace a complete Earphone Assembly. If your wires, terminals, covers and earphone protector are in good condition, you can use these with the new earphone speaker. The wires are secured to the speaker […]
Below (in blue) is a link to a KMDSI document showing the parts that are included in Kirby Morgan’s SL27 with the Superflow® Regulator, Soft Goods Overhaul Kit, P/N 525-365: P/N 525-365 Reseller Restriction This item is reseller restricted. Call us at 206-784-5050 or email info@divecommercial.com to purchase. Images of Kirby Morgan Helmets, Masks, or […]
Below (in blue) is a link to a KMDSI document showing what parts are included in Kirby Morgan’s Superflow® 350 Regulator Rebuild Kit, P/N 525-309 for the Superflow® 350 regulator: P/N 525-309 Reseller Restriction This item is reseller restricted. Call us at 206-745-4410 or email info@divecommercial.com to purchase. Images of Kirby Morgan Helmets, Masks, or […]
Stanley’s hydraulic underwater impact wrenches are used throughout the commercial diving industry by underwater construction crews The Stanley Hydraulic Underwater Impact Wrench model IW1234001 comes furnished with quick disconnect couplers, hose whips are sold separately. The 01652 12 in. Hose Whip (All Hydraulic Tools Require 2) and Stanley Tools 03917 Coupler Set For The Hydraulic […]
Stanley’s Hydraulic Underwater Chipping Hammer CH18, with “D” handle, is a light but powerful alternative for commercial divers to pneumatic tools. Both the handle and the tool holder ends are shock and heat insulated for commercial diver comfort. The Stanley Hydraulic Underwater Chipping Hammer CH18 comes furnished with hose whips. Stanley Tools 03971 Coupler Set For […]