The BandMask® “Hard Shell”, P/N 520-026, provides an additional layer of protection. No drilling or modifications are required for mounting on your Bandmask®. The legs of the Head Harness (Spider) run through the Hard Shell, holding it in place over the hood. The thick engineering thermoplastic (ABS) material is very durable. Reseller Restriction This item is […]
Kirby Morgan® P/N 200-017 An overpressure relief valve on your bailout bottle’s first-stage regulator makes over pressurization of the bailout hose due to a high pressure creep nearly impossible. The valve is designed to release pressure in the event of over pressurization of the first stage regulator. Reseller Restriction This item is reseller restricted. Call us at […]
Kirby Morgan’s “Emergency Valve Assembly”, P/N 505-070 is available complete. The separate components are also available. Contact us for information. Reseller Restriction This item is reseller restricted. Call us at 206-784-5050 or email info@divecommercial.com to purchase. Images of Kirby Morgan Helmets, Masks, or logos are registered trademarks or Kirby Morgan Dive Systems Inc.® Used with […]
Replace the bent tube if it is excessively scratched, lacks its chrome plating, is dented or compressed deeper than 1/8 inch. If the helmet has been used for burning jobs, carefully check for erosion of the metal or severe corrosion. Replace if any erosion is present or integrity is in question. Keep in mind the […]
This tape has a heavy-duty polyethylene backing and is single coated with synthetic rubber adhesive. The permanently tacky adhesive bonds well over a wide temperature range. Excellent low-temperature bonding. Each roll measures 2 inches by 60 yards. Available in white and black Contact us today for information about new Commercial Diving Equipment, Used Commercial Diving Equipment and/or Kirby Morgan Helmets!
DCI can supply you with a new muffler for your compressor’s Yanmar L100V Diesel engine. Contact us for information. Contact us today for information about new Commercial Diving Equipment, Used Commercial Diving Equipment and/or Kirby Morgan Helmets!
The Air Train Gasket, Part #510-762, is made from high quality rubber and eliminates the need to use silicone sealant to seal the edge of the air train on the inside of fiberglass helmet shells or mask frames. It also eliminates having to fill the hole (with silicone sealant) where the Alignment Screw is located so […]
Below (in blue) is a link to a KMDSI document showing the parts that are included in Kirby Morgan’s SL27 with the Superflow® Regulator, Soft Goods Overhaul Kit, P/N 525-365: P/N 525-365 Reseller Restriction This item is reseller restricted. Call us at 206-784-5050 or email info@divecommercial.com to purchase. Images of Kirby Morgan Helmets, Masks, or […]
Below (in blue) is a link to a KMDSI document showing what parts are included in Kirby Morgan’s Superflow® 350 Regulator Rebuild Kit, P/N 525-309 for the Superflow® 350 regulator: P/N 525-309 Reseller Restriction This item is reseller restricted. Call us at 206-745-4410 or email info@divecommercial.com to purchase. Images of Kirby Morgan Helmets, Masks, or […]
Aqua Lung Conshelf XIV 1st Stage Regulator is built for exceptional durability and continues to be the world’s most popular Military and Professional Operations regulator. Features: Approved for use by U.S. Navy under sections #1.5.9 and 1.5.10 World’s most popular military and professional regulator Durable, time-proven design Chrome-plated, marine brass Specifications: 1 High Pressure and […]