The Air Train Gasket, Part #510-762, is made from high quality rubber and eliminates the need to use silicone sealant to seal the edge of the air train on the inside of fiberglass helmet shells or mask frames. It also eliminates having to fill the hole (with silicone sealant) where the Alignment Screw is located so […]
Speakers for your Kirby Morgan© products are now easier to replace. The P/N 515-090 Speaker requires no soldering. You no longer have to replace a complete Earphone Assembly. If your wires, terminals, covers and earphone protector are in good condition, you can use these with the new earphone speaker. The wires are secured to the […]
Speakers for your Kirby Morgan© products are now easier to replace. The P/N 515-090 Speaker requires no soldering. You no longer have to replace a complete Earphone Assembly. If your wires, terminals, covers and earphone protector are in good condition, you can use these with the new earphone speaker. The wires are secured to the speaker […]
Below (in blue) is a link to a KMDSI document showing the parts that are included in Kirby Morgan’s SL27 with the Superflow® Regulator, Soft Goods Overhaul Kit, P/N 525-365: P/N 525-365 Reseller Restriction This item is reseller restricted. Call us at 206-784-5050 or email info@divecommercial.com to purchase. Images of Kirby Morgan Helmets, Masks, or […]
Below (in blue) is a link to a KMDSI document showing the parts that are included in Kirby Morgan’s SL27 with the Superflow® Regulator, Soft Goods Overhaul Kit, P/N 525-365: P/N 525-365 Reseller Restriction This item is reseller restricted. Call us at 206-784-5050 or email info@divecommercial.com to purchase. Images of Kirby Morgan Helmets, Masks, or […]
Below (in blue) is a link to a KMDSI document showing what parts are included in Kirby Morgan’s Superflow® 350 Regulator Rebuild Kit, P/N 525-309 for the Superflow® 350 regulator: P/N 525-309 Reseller Restriction This item is reseller restricted. Call us at 206-745-4410 or email info@divecommercial.com to purchase. Images of Kirby Morgan Helmets, Masks, or […]
Below (in blue) is a link to a KMDSI document showing what parts are included in Kirby Morgan’s Superflow® 350 Regulator Rebuild Kit, P/N 525-309 for the Superflow® 350 regulator: P/N 525-309 Reseller Restriction This item is reseller restricted. Call us at 206-745-4410 or email info@divecommercial.com to purchase. Images of Kirby Morgan Helmets, Masks, or […]
Upgrade your KMDSI Helmet or BandMask by replacing your original regulator with Kirby Morgans 455 Balanced Regulator (standard equipment on the KM97 Helmet) . The 455 Balanced regulator is a downstream balanced poppet design, and is featured on the new KM 97 Helmet. Like the widely used SuperFlow® 350, the 455 Balanced has a multi […]
The SuperFlow® & SuperFlow® 350 have been the benchmark in surface supplied demand regulators for more than 40 years and remain the most widely used helmet and BandMask® regulators. The uncomplicated chrome plated all brass regulator is of a non- balanced and venturi assisted design that allows the diver a wide range of adjustment. This […]
The balanced piston ensures a minimum cracking pressure and a minimum pressure drop across the entire breathing cycle. It has four standard low pressure outlets plus one “straight through” high flow port designed to be used with an optional big bore low pressure hose. Two high pressure ports are standard as well. CE Certification (view […]