SEASOFT has soft, clip-on weights available in 2, 3, 4 or 5 lbs. The SEASOFT SEABAG Clip-On Weights are warranted for 4 years against an lead coming out of any seam. CARE: SEABAGS should be dried with the main seam facing down to allow any water inside the SEABAG to drain out. The graphite will protect […]
These brackets are designed to mount directly onto the side weights of Fiberglass Kirby Morgan® Helmets except for the SL17a/b. The brackets are available in two sizes. The brackets are stainless steel as are the clamps. The short version is 4 inches tall. The tall version is 5 & 1/4 inches tall. Contact us today […]
This illustrated reference book has a most comprehensive overview of United States Navy Divers. An elaborate, oversized, hard-cover book, packed with full-color photos from the highlights of diving history, navy diving equipment, diver training, and organization to the present day global war on terrorism; it deserves a place of honor on your bookshelf! Although United States […]
The Manifold Block Assembly provides a control point for your bailout supply when using a light weight full face mask. It is equipped with four low pressure outlets, a check valve and an emergency valve assembly. It is available with a #6 JIC fitting, a 9/16″ O2 fitting or a standard SCUBA fitting. Part # […]
The BandMask® “Hard Shell”, P/N 520-026, provides an additional layer of protection. No drilling or modifications are required for mounting on your Bandmask®. The legs of the Head Harness (Spider) run through the Hard Shell, holding it in place over the hood. The thick engineering thermoplastic (ABS) material is very durable. Reseller Restriction This item is […]
Kirby Morgan® P/N 200-017 An overpressure relief valve on your bailout bottle’s first-stage regulator makes over pressurization of the bailout hose due to a high pressure creep nearly impossible. The valve is designed to release pressure in the event of over pressurization of the first stage regulator. Reseller Restriction This item is reseller restricted. Call us at […]
These stainless steel Helmet Brackets are suitable for mounting either Cameras or Lights to Kirby Morgan® diving helmets and BandMasks. These brackets are mounted to the Port Retainer using the Plug Screw which does not screw into a Port Retainer Insert. Contact us today for information about new Commercial Diving Equipment, Used Commercial Diving Equipment and/or Kirby Morgan Helmets!