This is the battery charger used with the Ocean Technology Systems (OTS) manufactured communicator in a Kirby Morgan KMAC5. The OTS communicator has “MK3-KMDSI” printed on the front panel of the communicator. Ask for KMDSI P/N: 415-150. This charger will not work with an Amron communicator. Contact us today for information about new Commercial Diving Equipment, Used Commercial Diving Equipment and/or Kirby Morgan Helmets!
The 455 Balanced regulator, sets a milestone in surface supplied breathing performance and is also compatible with all Kirby Morgan Helmets and BandMasks® that feature the SuperFlow® 350 or 450 regulators. The 455 Balanced regulator is a downstream balanced poppet design, and is featured on the new KM 97 Helmet. Like the widely used SuperFlow® […]
This is the battery charger used with the Amron manufactured communicator in a Kirby Morgan KMAC5. Ask for P/N 2823-603. This charger will not work with an Ocean Technology Systems (OTS) communicator. Contact us today for information about new Commercial Diving Equipment, Used Commercial Diving Equipment and/or Kirby Morgan Helmets!
One way valve overhauls should be performed at least annually and as dictated by condition revealed during daily/monthly inspection Click HERE for the document showing the One Way Valve Assembly Parts and their positions. Reseller Restriction This item is reseller restricted. Call us at 206-784-5050 or email info@divecommercial.com to purchase. Images of Kirby Morgan Helmets, […]
The 505-110 Sealed Pull Pins used on KMDSI helmets work extremely well and have shown to be very reliable with only minimal maintenance. The reliability stems from the Pull Pins being filled with silicone oil and sealed with O-rings. The silicone oil allows smooth hydraulic operation while preventing sand and debris from entering the sleeve. […]
Genuine Kirby Morgan Microphone elements are available as spare parts. Reseller Restriction This item is reseller restricted. Call us at 206-784-5050 or email info@divecommercial.com to purchase. Images of Kirby Morgan Helmets, Masks, or logos are registered trademarks or Kirby Morgan Dive Systems Inc.® Used with permission. Contact us today for information about new Commercial Diving Equipment, Used […]
The complete P/N 505-008, SL17A/B Neck Clamp/Yoke Assembly is available as a spare part. Click HERE for more information about this Assembly. Reseller Restriction This item is reseller restricted. Call us at 206-784-5050 or email info@divecommercial.com to purchase. Images of Kirby Morgan Helmets, Masks, or logos are registered trademarks or Kirby Morgan Dive Systems Inc.® […]
If the Standoffs on your KMDSI® SL17C, SL27, KM37, KM47, KM57, KM77, or KM97 are bent, replace them so that your Swing Catch and mounting screws are protected. Removing what’s left of a broken Swing Catch side mount screw is a very expensive procedure. NOTE: These parts are not compatible with older Neck Rings where Standoffs were […]
The Kirby Morgan® Air Control System 5 (KMACS 5) is a lightweight, portable control box for use in surface supplied air diving operations. The KMACS 5 controls the diver’s air supply and monitors the diver’s depth. The KMACS 5 is also available with communications (see link below). The air supply can be from either a […]
Dive Commercial International keeps Kirby Morgan P/N 425-120 KMACS & DCS Regulator Rebuild Kits in stock. Below (in blue) is a link to a KMDSI document showing what parts are included in Kirby Morgan’s P/N 425-120 KMACS & DCS Regulator Rebuild Kits: P/N 425-120 Reseller Restriction This item is reseller restricted. Call us at 206-784-5050 or email info@divecommercial.com to […]