Gauge Easy read 2.75” diameter gauge Dual dial – 0 to 5000 psi and 0 to 350 bar Stainless steel case 1.5% Accuracy throughout full range Liquid glycerin filled for dampening Air bubble to allow for expansion with temperature change Gauge Boot Included with fill checker Snug fitting, silicone compound for protection of gauge Twist […]
Category: Accessories
XS Scuba Standard Fill Checker
Features Easy read 2.75” diameter gauge Dual dial – 0 to 5000 psi and 0 to 350 bar Stainless steel case 1.5% Accuracy throughout full range Liquid glycerin filled for dampening Air bubble to allow for expansion with temperature change Twist Bleed Screw Stainless steel bleed screw Positive seal PDVF seat Easy replacement bleeder screw […]
Stainless Steel, 8″ Shackle Breaker Assembly
Dive Commercial International sells 8″, Stainless Steel Shackle Breakers with a Stainless Steel Shackle and a Brass #2 Snap Shackle. The three parts can be purchased separately. We carry a large variety of shackles, snap shackles and other related hardware. Contact us today for information about new Commercial Diving Equipment, Used Commercial Diving Equipment and/or Kirby Morgan Helmets!
AXSUB® Portable Battery Pack and Optional Battery Charger
The Battery Packs can be used with any of the AxVIEW-P, AxVIEWV-P, AxVIEWHDV-P and AxVIEWV-RM systems as Battery Back-up or Main Power Supply. The AxVIEW systems integrate an Uninterruptible Power Supply (UPS) that switches to a 24VDC auxiliary source in case of a main’s supply power failure (120-240VAC). This ensures to the Diving Operations Supervisor and […]
AXSUB® Standard and Advanced Hand Held Bracket Systems
Standard Hand Bracket System This AXSUB® Hand Diving Bracket (HBR) is the second generation of our Hand Bracket/Mount for use without Quick Release System. Our hand brackets are fabricated using 14 Gauge SS316 steel and integrate a Delrin seat that can secure enclosures between 25 and 68mm diameter. The bracket kit is delivered with two […]
AXSUB® Standard Head Bracket System for Light/Camera
AXSUB® Diving Head Bracket Kit is the second generation of our Head Bracket/Mount for use without Quick Release System. It is available in two versions: Helmet Mount and Mask Mount. Our head brackets are fabricated using 14 Gauge SS316 steel and integrate a Delrin seat that can secure enclosures between 25 and 68mm diameter. The […]
AXSUB® Advanced Head Bracket System for Light/Camera
AXSUB® Hand Diving Bracket (HBR) is the second generation of our Hand Bracket/Mount for use with its built-in Quick Release System. It is available in two versions: Helmet Mount and Mask Mount. Our hand brackets are fabricated using 14 Gauge SS316 steel and integrate a Delrin Quick release mechanism that can secure enclosures between 25 […]
SEASOFT SEABAGS
SEASOFT SEABAGS™ are corrosion-resistant, lead shot filled bags made of super strong, high-density neoprene. These bags are closed with an industrial “Serger” sewing machine and straight-stitched with a walking foot sewing sewing machine for extra strength. These 5 threads of thick 100% nylon protect the seams from opening up, even with rough treatment. Go ahead and […]
SEASOFT SEABAG Clip-On Weights
SEASOFT has soft, clip-on weights available in 2, 3, 4 or 5 lbs. The SEASOFT SEABAG Clip-On Weights are warranted for 4 years against an lead coming out of any seam. CARE: SEABAGS should be dried with the main seam facing down to allow any water inside the SEABAG to drain out. The graphite will protect […]
Helmet Side Weight Light/Camera Bracket
These brackets are designed to mount directly onto the side weights of Fiberglass Kirby Morgan® Helmets except for the SL17a/b. The brackets are available in two sizes. The brackets are stainless steel as are the clamps. The short version is 4 inches tall. The tall version is 5 & 1/4 inches tall. Contact us today […]